Star13 Electric Glider Ready to Fly (with air brakes)

Product description

Star13 Ready to Fly electric glider

 

Unique option, special size selection!
You can choose a 1-2-3-4-5-6 meter version!
You can order this model in different sizes!
Do you want it smaller or bigger than your current size?
Order the model in the right size for you!
This is an exceptional opportunity!
Only at Paco Modell!

 

Star 13  is a wide wingspan, antique, competition glider model. It has a structurally complete classic, wood construction and shows great flight performance. It reached 2nd and 3rd places at the Hungarian National Championship in 2012 and won the same tournament in 2013. In 2014-2016 it finished in the 2nd place at the European Championship. It is constantly ranked among the best at both the international and the Hungarian tournaments. The original airplane was designed by K. H. Stadler in 1943. The reconstructed model is the 0,9 times reduced copy of the original 3,5 meter aircraft. The very first plane was built by István Kornó in 2011 following the idea of László Török. Drawings have been created by Gábor Pásztor.

You don't  have to waste time and energy for the assembly – we’ve done that perfectly for you. For moving the tailplain perfectly Korno Balance Mechanics is applied. These devicesare now considered to be essentialto install in a European champion model.There are only a few things left for you: installing the servos, the motor, the receiver and the battery. Their locations are already specified and it can be completed by twiting some screws in. But if it is an entirely completed aircraft you prefer to take over we can eve n do all that, too for you.

After all these you can truly be sure that your glider is really of a high technical quality to enter international tournaments.

In case you prefer to build the airplane by yourself, you can find here the building kit version.

Best of the model’s tournament results:
2nd-3rd at Hungarian National Championship in 2012
1st at Hungarian National Championship in 2013
2nd at European Championship in 2014
2nd at European Championship in 2016
3nd at European Championship in 2018

The airplane is built in Paco Model Studio where other antique or lifelike models can be created in any size for individual order.

Specifications:
Length: 1800 mm
Wingspan: 3120 mm
Wing surface  80,4 dm2
Take-off weight: 1.900 g
Surface load: 23,6 g/dm2
Navigation: elevator, rudder, motor
Optional: airbrakes

Star13 Electric Glider Ready to Fly (with air brakes)


Order procedure

Star 13 glider model
Can be ordered as a SAM competition model:
OTVR or OTVR-E category
Can be ordered as a hobby mdel with airbrake:
Glider or electric Glider

Each category has a FULL LC Kit or RTF version.

You can choose a 1-2-3-4-5-6 meter version!

 

When you order, you have to pay half of the full price. We will start to build the model, after the order is placed. Our models are not in stock, every single one is built to order! The models are built by extremely experienced model builders, who have great passion for model gliders!mThis guarantees high quality craftsmanship.

We only use high quality selected balsa sheets.

This guarantees low weight and high strength in our models.

Building time is about ~4-5 weeks.

We send pictures to you weekly, so you can see the building procedure.  This way, you can have a look at the birth of your model.  When everything is finished, we will send you a video showing the final product. You will have to pay the second half of the price after seeing the video. When we get the money, we will be able to ship it to your location.

The packaging is very secure, it is done in a robust double walled box.

 

Basic Glider model:

Ready to Fly with servos: 1190 €

with built-in electric trigger: +100€ (nose or cg)

Airbrake on the wings +100€

Compact version +100€

 

Basic Electric Glider model

Ready to Fly with servos: 1390€

Electric drive set: +200€ (brushless motor +ESC+prop.set)

Airbrake on the wings +100€

Compact version +100€


optional: There may be paint variations.

 

Order info: info@pacomodell.hu

 

Fixed shipping cost to Europe: 100€

Fixed shipping cost all to world: 150€

 

Requires

Your Own 4 Channel TX/RX
Lipoly Battery 2200mAh 3S 

Adding to cart… The item has been added

Product description

Star13 Ready to Fly electric glider

 

Unique option, special size selection!
You can choose a 1-2-3-4-5-6 meter version!
You can order this model in different sizes!
Do you want it smaller or bigger than your current size?
Order the model in the right size for you!
This is an exceptional opportunity!
Only at Paco Modell!

 

Star 13  is a wide wingspan, antique, competition glider model. It has a structurally complete classic, wood construction and shows great flight performance. It reached 2nd and 3rd places at the Hungarian National Championship in 2012 and won the same tournament in 2013. In 2014-2016 it finished in the 2nd place at the European Championship. It is constantly ranked among the best at both the international and the Hungarian tournaments. The original airplane was designed by K. H. Stadler in 1943. The reconstructed model is the 0,9 times reduced copy of the original 3,5 meter aircraft. The very first plane was built by István Kornó in 2011 following the idea of László Török. Drawings have been created by Gábor Pásztor.

You don't  have to waste time and energy for the assembly – we’ve done that perfectly for you. For moving the tailplain perfectly Korno Balance Mechanics is applied. These devicesare now considered to be essentialto install in a European champion model.There are only a few things left for you: installing the servos, the motor, the receiver and the battery. Their locations are already specified and it can be completed by twiting some screws in. But if it is an entirely completed aircraft you prefer to take over we can eve n do all that, too for you.

After all these you can truly be sure that your glider is really of a high technical quality to enter international tournaments.

In case you prefer to build the airplane by yourself, you can find here the building kit version.

Best of the model’s tournament results:
2nd-3rd at Hungarian National Championship in 2012
1st at Hungarian National Championship in 2013
2nd at European Championship in 2014
2nd at European Championship in 2016
3nd at European Championship in 2018

The airplane is built in Paco Model Studio where other antique or lifelike models can be created in any size for individual order.

Specifications:
Length: 1800 mm
Wingspan: 3120 mm
Wing surface  80,4 dm2
Take-off weight: 1.900 g
Surface load: 23,6 g/dm2
Navigation: elevator, rudder, motor
Optional: airbrakes

LC - Laser Cut Kits
Star13 Electric Glider Full LC kit

Star13 Electric Glider Full LC kit

Star13 antique competition glider Professional build kit, not just for pros!   Star 13 is a wide-wingspan, antique, competition glider model. It has a great flight performance, and classic wood...

RTF - Ready To Fly
Táltos"Pegasus" Compact Version Electric Glider

Táltos"Pegasus" Compact Version Electric Glider

  Táltos "Pegasus" electric glider   Get to know the amazing "Táltos" hand-made wooden glider!Its wings boast bird-like curves!You can try the wonderful experience of flying like a birdnow...